Search results for: 'midi+relai+differ+output+module+0+relai+8+dimmers'
-
USB-MIDI-R8£77.30 £64.42 As low as £58.08 £48.40Controlled with MIDI over USB, or DIN.
Learn More
Relays - 8
Power - 12V DC adaptor, supplied separately.
Relay current - Up to 8A @24vdc or 250vac
Connections - Screw Terminals for N/O N/C and Common contacts. -
dSx42L£30.61 £25.51 As low as £23.00 £19.17Learn MoreExpansion board for dScript modules, powered and controlled through the dS modules RS485 port.
Relays - 2
Relay current - 16Amp @24vdc or 250vac
Inputs - 4 which may be digital or 10-bit 0-5v analogue
Serial ports - 1 RS485 port.
Power - 12v from connected dScript module (requires twin pair cable) or directly on screw terminals if required. -
USB-RLY16L£83.99 £69.99 As low as £63.10 £52.58Powered and Controlled from the USB bus.
Learn More
Relays - 8 latching relays
Relay current - Up to 16Amp @24vdc or 250vac
Power - Powered from standard USB bus
Control interface - USB -
ETH8020-B£132.19 £110.16 As low as £99.31 £82.76Controlled over Ethernet using simple TCP/IP commands.
Learn More
Relays - 20
Analogue Inputs (0-5v) - 8
Power - 12V DC adaptor, supplied separately.
Configuration & Test interface - HTTP (webpage).
Control interface - TCP/IP over Ethernet.
Relay current - Up to 16Amp @24vdc or 250vac
Connections - Screw Terminals for N/O N/C and Common contacts.
Ethernet connection - 100mb full duplex -
MBH88£71.99 £59.99Controlled by modbus RTU over RS485, address, baud rate and parity set by dip switch.
Learn More
Relays - 8 VFC with snubbers on N/O
Relay current - Up to 16Amp @24vdc or 250vac
Digital opto isolated inputs - 8
Power - Universal input: 90 – 264Vac, 47-63Hz
Control interface - Modbus RTU over RS485. -
RLY08-B£38.80 £32.33 As low as £30.79 £25.66Serial or I2C control
Relays - 8
Learn More
Relay current - Up to 1Amp @30vdc or 60vac. 500mA@110vac. 250mA@250vac
Power - 5v @ 100mA max
Control interface - Serial or I2C
Expansion - Up to 8 modules on Serial or I2C bus -
MB24V008£65.24 £54.37 As low as £51.79 £43.16High side switching outputs with Inductive load switching in mind. Ideal for controling solenoids, relays, valves and more.
Power - 24vdc
Learn More
Digital IO - 8 x 24vdc outputs @ upto 1.5A each or a 24vdc input
Control interface - Modbus RTU over RS485. -
dS2832£200.26 £166.88 As low as £150.46 £125.38Learn MoreNetwork enabled module with fully customizable firmware.
Relays - 32 with optional integrated snubbers.
Relay current - Up to 16Amp @24vdc or 250vac
I/O - 8 channels, your choice of VFC input, NPN output, or 12-bit A/D.
Serial ports - 1 x TTL level serial port, 1 RS485 port.
Power - 12V DC adaptor, supplied separately
Configuration & Test interface - HTTP (webpage)
Control interface - TCP/IP over Ethernet
Connections - Screw Terminals for N/O N/C and Common contacts
Ethernet connection - 100mb full duplex -
TCP184£77.30 £64.42 As low as £58.08 £48.40Learn MoreNetwork enabled module with fully customizable firmware.
Relays - 4
Relay current - Up to 16Amp @24vdc or 250vac
I/O - 8 channels, your choice of VFC input, NPN output, or 12-bit A/D.
Serial ports - 1 x RS485 port.
Power - AC mains universal input: 90–264V AC, 47-63Hz.
Configuration & Test interface - HTTP (webpage)
Control interface - TCP/IP over Ethernet
Connections - Screw Terminals for N/O N/C and Common contacts
Ethernet connection - 100mb full duplex -
ETH24V008H£94.27 £78.56 As low as £70.82 £59.02Controlled over Ethernet using simple TCP/IP commands or MQTT.
Built with Inductive load switching in mind.
Learn More
Ideal for solenoids, relays, valves and more.
Digital IO - 8 x 24vdc outputs @ upto 1.5A each or a 24vdc input
Power - 24vdc supplied into screw terminals
Configuration & Test interface - HTTP (webpage).
Control interface - TCP/IP commands or MQTT over Ethernet.
Ethernet connection - 100mb full duplex