Search results for: 'devantech+led+ethernet+relai+ds1242'

Expansion board for dScript modules, powered and controlled through the dS modules RS485 port.

Relays - 2 
Relay current - 16Amp @24vdc or 250vac
Inputs - 2 Volt Free Contact inputs
Thermocouple - 1 cold junction compensated K-type thermocouple input
Serial ports - 1 RS485 port.
Power - 12v from connected dScript module, or directly on screw terminals if required.

Powered and Controlled from the USB bus.

Relays - 2
Relay current - Up to 1Amp @30vdc or 60vac. 500mA@110vac. 250mA@250vac 
Analogue/digital inputs - 8 (5V max, choice of 5V, 4.096V or 2.048V scale for Analogue conversion)
Power - Powered from standard USB bus 
Control interface - USB 

Controlled by modbus RTU over RS485, address, baud rate and parity set by dip switch. 

Relays - 8 VFC with snubbers on N/O
Relay current - Up to 16Amp @24vdc or 250vac
Digital opto isolated inputs - 8
Power - Universal input: 90 – 264Vac, 47-63Hz
Control interface - Modbus RTU over RS485. 

High side switching outputs with Inductive load switching in mind. Ideal for controling solenoids, relays, valves and more.

Power - 24vdc
Digital IO - 8 x 24vdc outputs @ upto 1.5A each or a 24vdc input
Control interface - Modbus RTU over RS485. 

Powered and Controlled from the USB bus.

Relays - 8 latching relays
Relay current - Up to 16Amp @24vdc or 250vac 
Power - Powered from standard USB bus 
Control interface - USB 

Controlled from the USB bus.

Relays - 8
Relay current - Up to 16Amp @24vdc or 250vac
Isolated Inputs - 8
Input Voltage - 4.5v DC to 27v DC
Power - 12V DC adaptor, supplied separately.
Control interface - USB