dScript series
Ethernet modules
All dScript modules come pre installed with a comprehensive web configuration and control utility, but using the dScript IDE you can develop your own custom firmware, or edit and upload one of the many example projects.
dScript IDE
dScript is is an Editor, Compiler, Programmer and a Multithreaded language for our dScript series of internet connected modules. It compiles to efficient byte codes that are run by the modules on-board runtime.
Although dScript is not BASIC the syntax of dScript will be familiar to anyone who has used Visual Basic or the small Basic chips and modules that are available.
-
dS1242£59.92 As low as £45.01Network enabled module with fully customizable firmware.
Relays - 2
Learn More
Relay current - Up to 16Amp @24vdc or 250vac
Digital I/O - 4 channels, your choice of VFC input or NPN output.
Analogue Inputs - 2 channels of 10-bit A/D.
Serial ports - 1 x TTL level serial port.
Power - 12V DC adaptor, supplied separately
Configuration & Test interface - HTTP (webpage)
Control interface - TCP/IP over Ethernet
Connections - Screw Terminals for N/O N/C and Common contacts
Ethernet connection - 100mb full duplex -
dS2242£60.96 As low as £45.79Learn MoreNetwork enabled module with fully customizable firmware.
Relays - 2
Relay current - Up to 16Amp @24vdc or 250vac
Inputs - 4 that can act as digital, or 10-bit analogue inputs
Serial ports - 1 x TTL level serial port and 1 RS485 port
Power - 12V DC adaptor, supplied separately
Configuration & Test interface - HTTP (webpage)
Control interface - TCP/IP over Ethernet
Connections - Screw Terminals for N/O N/C and Common contacts
Ethernet connection - 100mb full duplex -
dSx42L£30.61 As low as £23.00Learn MoreExpansion board for dScript modules, powered and controlled through the dS modules RS485 port.
Relays - 2
Relay current - 16Amp @24vdc or 250vac
Inputs - 4 which may be digital or 10-bit 0-5v analogue
Serial ports - 1 RS485 port.
Power - 12v from connected dScript module (requires twin pair cable) or directly on screw terminals if required. -
dSx42K£47.52 As low as £35.70Expansion board for dScript modules, powered and controlled through the dS modules RS485 port.
Relays - 2
Learn More
Relay current - 16Amp @24vdc or 250vac
Inputs - 2 Volt Free Contact inputs
Thermocouple - 1 cold junction compensated K-type thermocouple input
Serial ports - 1 RS485 port.
Power - 12v from connected dScript module, or directly on screw terminals if required. -
dSX42H£29.60 As low as £22.25Expansion board for dScript modules, powered and controlled through the dS modules RS485 port.
Relays - 2
Learn More
Relay current - 16Amp @24vdc or 250vac
Inputs - 4 optically isolated 230vAC inputs
Serial ports - 1 RS485 port.
Power - 12v from connected dScript module or directly on screw terminals if required.