dScript series
Ethernet modules
All dScript modules come pre installed with a comprehensive web configuration and control utility, but using the dScript IDE you can develop your own custom firmware, or edit and upload one of the many example projects.
dScript IDE
dScript is is an Editor, Compiler, Programmer and a Multithreaded language for our dScript series of internet connected modules. It compiles to efficient byte codes that are run by the modules on-board runtime.
Although dScript is not BASIC the syntax of dScript will be familiar to anyone who has used Visual Basic or the small Basic chips and modules that are available.
-
dSx42L£30.61 As low as £23.00Learn MoreExpansion board for dScript modules, powered and controlled through the dS modules RS485 port.
Relays - 2
Relay current - 16Amp @24vdc or 250vac
Inputs - 4 which may be digital or 10-bit 0-5v analogue
Serial ports - 1 RS485 port.
Power - 12v from connected dScript module (requires twin pair cable) or directly on screw terminals if required. -
dSx42K£47.52 As low as £35.70Expansion board for dScript modules, powered and controlled through the dS modules RS485 port.
Relays - 2
Learn More
Relay current - 16Amp @24vdc or 250vac
Inputs - 2 Volt Free Contact inputs
Thermocouple - 1 cold junction compensated K-type thermocouple input
Serial ports - 1 RS485 port.
Power - 12v from connected dScript module, or directly on screw terminals if required. -
dSX42H£29.60 As low as £22.25Expansion board for dScript modules, powered and controlled through the dS modules RS485 port.
Relays - 2
Learn More
Relay current - 16Amp @24vdc or 250vac
Inputs - 4 optically isolated 230vAC inputs
Serial ports - 1 RS485 port.
Power - 12v from connected dScript module or directly on screw terminals if required.