Search results for: 'dS2824'
- Related search terms
- dS2824 case
- dS2824+case
- dS2824 - 24 x 16A ethernet relay 24 Snubbed Outputs
- ds2824 24 x 16a ethernet relays 24 snubbed outputs
-
dS2824£160.25 £133.54 As low as £120.40 £100.33Learn MoreNetwork enabled module with fully customizable firmware.
Relays - 24 with optional integrated snubbers.
Relay current - Up to 16Amp @24vdc or 250vac
I/O - 8 channels, your choice of VFC input, NPN output, or 12-bit A/D.
Serial ports - 1 x TTL level serial port, 1 RS485 port.
Power - 12V DC adaptor, supplied separately
Configuration & Test interface - HTTP (webpage)
Control interface - TCP/IP over Ethernet
Connections - Screw Terminals for N/O N/C and Common contacts
Ethernet connection - 100mb full duplex -
dS2824 Case£30.92 £25.77 As low as £23.23 £19.36Case for the dS1242.
Includes mounting holes for fixing to a wall or back panel as well as an integrated DIN rail clip.
Supplied as case only, dS2824 sold separately.
Learn More -
dSX42H£29.60 £24.67 As low as £22.25 £18.54Expansion board for dScript modules, powered and controlled through the dS modules RS485 port.
Relays - 2
Learn More
Relay current - 16Amp @24vdc or 250vac
Inputs - 4 optically isolated 230vAC inputs
Serial ports - 1 RS485 port.
Power - 12v from connected dScript module or directly on screw terminals if required. -
dSx42L£30.61 £25.51 As low as £23.00 £19.17Learn MoreExpansion board for dScript modules, powered and controlled through the dS modules RS485 port.
Relays - 2
Relay current - 16Amp @24vdc or 250vac
Inputs - 4 which may be digital or 10-bit 0-5v analogue
Serial ports - 1 RS485 port.
Power - 12v from connected dScript module (requires twin pair cable) or directly on screw terminals if required. -
dSx42K£47.52 £39.60 As low as £35.70 £29.75Expansion board for dScript modules, powered and controlled through the dS modules RS485 port.
Relays - 2
Learn More
Relay current - 16Amp @24vdc or 250vac
Inputs - 2 Volt Free Contact inputs
Thermocouple - 1 cold junction compensated K-type thermocouple input
Serial ports - 1 RS485 port.
Power - 12v from connected dScript module, or directly on screw terminals if required.